| | |

Tutorial: How to Make a Skirt From Scratch for Costumes

wearing the high-waisted skrit

Learn how to make a high-waisted skirt for your next costume. I’ll show you how to add an elastic back so that you don’t have to worry about how to install a zipper. I’ll walk you through how to design and sew your cosplay skirt and how to add hidden pockets. This is a great project for advanced beginners who are ready to start sewing their costumes completely from scratch.


This page contains affiliate links. As an Amazon Associate, I earn a small commission from qualifying purchases.


Supplies Needed:

This is a 1-page pocket pattern you can print out and use if you want pockets in your skirt.

(all of my patterns include 1/2″ seam allowance)
How to Make your pattern:

First, take your measurements:

  • Waist: Measure around your waist and add 1/2″ (for ease)
  • Empire Waist: Measure around your high waist and add 1/2″ for ease (however high you want your skirt to go)
  • High Hip: Measure around your hip bones and add 1″ for ease
  • Full Hip: Measure the fullest part of your hips and add 1.5″ for ease

You also need the length between your measurements:

  • Length from Empire waist to waist
  • Length from Waist to High Hip
  • Length from High Hip to Full Hip

make your grid

Make your grid. Use your length measurements from above to draw horizontal lines spaced for the empire waist, waist, high hip, and full hip. Then draw a straight line down for your center front.

set your waist line

Add your waist measurement + 1 inch. Then, in the center of the waist, add two dots one inch apart

make your waist dart

Make your waist dart. Make a dot at the high hip line centered underneath the waist dots. Then draw your dart legs.

connect your empire waist

Add your empire measurement + 1 inch. Add the dot for your empire measurement and draw a curved line up from the waist dot.

connect your waist darts

Draw straight lines up from the waist dart legs.

make your empire waistline

Add a center front dot 1/2″ up. Draw a curved line from the empire side measurement dot.

mark your hip lines

Add a dot for your high hp and your full hip. Connect the waist to the high hip with a straight line.

make your skirt length

Draw the length of your skirt. Make a line from the high hip down to however long you want your skirt to be. Then draw a line that same length of the high hip dot on the side. This line must be drawn at an angle that is wider than the full hip measurement.

make your skirt bottom

Draw the bottom of the skirt.

make your front facing

Trace the top section for the facing.

copy the side seam to the back

Copy the side front to use for the side back.

double the length of the waist and make a straight back seam

Make a straight line that is twice the waist length. Connect that line to the empire waist and draw the bottom of the skirt.

make your waistband

Copy the top to use as a waistband and casing.

make your waistband

Draw a line down the center for a stitch line.

finished pattern pieces

Finished pattern pieces. All of the pieces can be cut on the fold, you will need two of the back waistband, and the front facing will require interfacing.

Don’t forget to add seam allowance to all of your pattern pieces!

Step 1


Step 2


Step 3


Step 4


Step 5


Step 6


Step 7


Step 8


Step 9


Step 10


Step 11


Step 12



Finished!

finished skirt
finished skirt

Similar Posts